linux fuse redimgbld error : "Reliance Edge image builder tool disabled"
oo....need changed redconf.h #define REDCONF_IMAP_EXTERNAL 1
I'm glad you got this working - Was this a configuration difference between your driver, and the codebase used to build the tool initially?
Generally speaking, that message indicates that REDCONF_IMAGE_BUILDER is set to 0 in your redconf.h file:
#define REDCONF_IMAGE_BUILDER 0
Did you need to enable this as well?
REDCONF_IMAP_EXTERAL is required when the imap itself is too large to be inlined - From the Manual:
184.108.40.206 Imap Configuration Options
REDCONF_IMAP_INLINE and REDCONF_IMAP_EXTERNAL are set based on the size and block size of the configured volumes. Reliance Edge uses a free space bitmap called the imap. When the imap is small enough to fit in
the metaroot block (which tends to be the case with smaller volumes or larger block sizes), the inline imap code is used; this is an optimization for smaller volumes. When the imap is too large to be inlined, the external imap code
is used. If there are no volumes using the inline imap code, it is disabled by setting REDCONF_IMAP_INLINE to zero to reduce code size. Likewise, if there are no volumes using the external imap code, it is disabled by setting
REDCONF_IMAP_EXTERNAL to zero to reduce code size.
[Tuxera] Is everything working properly for you now? Thank you!
[ed. note: email@example.com last edited this post 2 months, 4 weeks ago.]